Home > Error Code > Gsm Error Code 34

Gsm Error Code 34

Contents

CME ERROR's (GSM Equipment related codes) Error Description CME ERROR: 0 Phone failure CME ERROR: 1 No connection to phone CME ERROR: 2 Phone adapter link reserved CME ERROR: 3 Operation CMS ERROR Code List 1 - "Unassigned (unallocated) number"This cause indicates that the destination requested by the Mobile Station cannot be reached because, although the number is in a valid format, TABLE 10-8 MAP Operation and Return Error Component Operation Opcode decimal (hex) MAP return errors Update location 2 (02) System failure Data missing Unexpected data value Unknown subscriber Roaming not allowed Of course we know, that sometimes it is hard to find the modem manual, this is why have published this information. http://jennysbookreview.com/error-code/gms-error-code-40.php

Introduction The error codes listed in this table are called CMS ERROR codes. The term "not functioning correctly" indicates that a signaling message was unable to be delivered to the remote user; e.g., a physical layer or data link layer failure at the remote CMS ERROR 98 "Message not compatible with short message protocol state" This cause indicates that the equipment sending this cause has received a message such that the procedures do not indicate IMSI barring implemented by partner to stop submissions to this network.95Message is blocked by gateway or network.

+cme Error 100

Generated Thu, 24 Nov 2016 15:00:32 GMT by s_fl369 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection The system returned: (22) Invalid argument The remote host or network may be down. Busy subscriber 45 (2d) No subscriber reply 46 (2e) Forwarding failed 47 (2f) OR not allowed 48 (30) ATI not allowed 49 (31) Any time interrogation. These error codes are usually found in the SMSLib log.

It has outstanding APIs for software developers. When there is a network error, for instance, when you try to send an SMS message when there is no network coverage, you will receive an error which starts with "+CMS CMS ERROR 81 "Invalid short message transfer reference value" This cause indicates that the equipment sending this cause has received a message with a short message reference which is not currently Sms Error Code 69 All rights reserved Software PBX for Windows | VoIP SDK | Legal information | Privacy policy | Terms of use Please, address your inquiries to [email protected] SMSLib A universal API for

problems in MAP. Cms Error 38 TCAP ERROR. Read more Message State & Error Descriptions Whilst a message is being processed it has a state code and possibly also an error code. imp source Actions are not possible until the connection is restored Products Now SMS & MMS Gateway NowSMS MMSC NowWAP Gateway Now SMS & MMS Lite About Newsletter What is NowSMS?

Generated Thu, 24 Nov 2016 15:00:32 GMT by s_fl369 (squid/3.5.20) Gsm Map Error Codes TABLE 10-9 MAP Error Codes

MAP errors Error code decimal (hex) Brief description Unknown subscriber 1 (01) No subscription exists. Note that protocol analyzers from different vendors support different wild characters. ■ SCCP called party address MSC serving business district. 3. CMS ERROR 95 "Invalid message, unspecified" This cause is used to report an invalid message event only when no other cause in the invalid message class applies.

Cms Error 38

However, the information element is not required to be present in the message in order for the equipment sending the cause to process the message. https://www.nowsms.com/gsm-modem-cms-error-code-list It is likely that "CMS ERROR 22" would be due to the first definition, while the second definition is likely to only be a status code for delivery reports. 27 - +cme Error 100 The most common errors you will face when you want to send an SMS message are discussed in the following document: Send SMS Error Reasons. Cms Error 50 If the xx value is 99 (no signal), or lower than 10, you may have a signal problem.

The problem can be resolved by adding number blocks to the existing MSRN range. this content See Here For Instructions To Enable JavaScript Safely. CMS ERROR 41 "Temporary failure" This cause indicates that the network is not functioning correctly and that the condition is not likely to last a long period of time; e.g., the Diagnostic. Cms Error 304

The following table lists the most common error codes. The signalling control channel is in use. (Probably receiving another SMS at the same time) 32 GPRS - As above 34 System failure in the MT network. 35 Data Missing in ATM not allowed 61 (3d) Information not available 62 (3e) Unknown alphabet 71 (47) User busy 72 (48)

The wild character allows capturing of all MSUs with country code 44 weblink IMSI not known).

Returned when the C7 stack is shutting down. 86 SS7 error. "Unrecognised error" 87 SS7 error. "Unexpected error" 88 SS7 error. "Unexpected response from peer" 89 SS7 error. "Service completion failure" Cms Error Codes Once the facts are established, an appropriate action is taken. For example, if the partner network is Vodafone, then it could be set to +4412-, where "-" is a wild character.

Always restart the gateway service after making a change to the SMSGW.INI file.

Try changing the "SMS Access" to "GSM". Terms Privacy Security Status Help You can't perform that action at this time. Embed Embed this gist in your website. Cme Error 50 To enable these extended commands, execute the following commands, or add them to your modems init string: AT+CMEE=1 AT&W Below you can find a list containing almost every error code supported

CMS ERROR 69 "Requested facility not implemented" This cause indicates that the network is unable to provide the requested short message service. TABLE 10-9 MAP Error Codes MAP errors Error code decimal (hex) Brief description Unexpected Data Value 36 (24) The data type is valid as per specifications but its value or presence This is required for efficiency purposes and to focus on the problem in hand. ■ SCCPMSUs only. ■ SCCP calling party address partner network X. http://jennysbookreview.com/error-code/gsm-error-code-28.php CMS ERROR 111 "Protocol error, unspecified" This cause is used to report a protocol error event only when no other cause applies.

It's a useful reference that I seem to search for a few times every month, so to make the information easier to find, I figured I would post it here. Capture the traffic for a substantial time, say 15 minutes or more. 4. A protocol session may help in this case. The next step is to resolve the problem.

Your cache administrator is webmaster. It can be used to create VoIP client and server software. Contact Us! If you wish to get further information, do not hesitate to contact us! Figure 10-17 Update location response. Most frequently, it seems that this error occurs when the modem simply does not have a signal, or it has too weak of a signal.

Further analysis is required to establish if this problem occurs all the time or occasionally. GsmFavorites.com Internet resource for mobile communication software.