Home > Hardware Error > Hardware Error 0502 Lexmark X6150

Hardware Error 0502 Lexmark X6150

I am so happy now and can now get some work done around here without having to alway go to my office to print stuff. by [emailprotected] on Dec 20, 2005 at 2:08am Add comment Please sign in to comment Thank you so much for these instructions. Thanks for the post, and another thanks goes to Alan, way back to 2007! :)) Cheers. Reply Chris says: 2008-01-29 at 12:49 pm Great solution! http://jennysbookreview.com/hardware-error/hardware-error-0502-lexmark.php

Watch Queue Queue __count__/__total__ Find out whyClose ERROR DE HARDWARE 502 LEXMARK 5150 Alonso SubscribeSubscribedUnsubscribe8383 Loading... thx Reply DW says: 2006-11-20 at 2:29 pm Tried the paper towel trick on my Dell A10 A960 getting that error code. I saw this site and the corresponding original message from ‘clem.' I cleaned the rod with a tissue several times, cleaned it with the paper towel, messed with the encoder strip, Reply Bob says: 2009-12-12 at 7:32 pm Thanks for the wonderful tip - I was sure I would have to purchase a new printer and did not want to. http://support.lexmark.com/index?page=content&productCode=LEXMARK_X6150&segment=SUPPORTproductCode%3D&userlocale=ES_ES&id=SO3370

That was quick and easy, thank you! Make a standalone copy. 13. At my first glance the locks for the cartridges appeared to be loose, but upon closer examination and removing one of them, I realized that they were both installed UPSIDE DOWN.

Practical advice that the manufacturers should heed. I thought this was the easy part and after 2 hours of no luck I refered back to WSnipes and tried to feel for the foam tape he spoke of. many hours of headaches trying new cartridges and fiddling with the encoder strip with no success. Reply Bill K says: 2008-01-26 at 12:40 am Used this tip (paper towel) on my Dell A960 printer & it worked great!

Was about to throw the printer away and get a new one. Thanks. Application Error en We're sorry for the inconvenience. Thanks again Reply ROI says: 2008-05-02 at 7:20 am Printer blows….cartridges are like $60 for both…take your money and get a new one - HP anything.

Please help. Hope this helps someone out there. Worked like a charm. In the end, i follow the instructions as what lexmark support site given, and it works.

Reply Amy says: 2008-01-27 at 1:46 am Is this slot that the encoder strip slides into in the middle of the cartridge carrier or on the right or left side? http://lexmarkprinters.livejournal.com/10816.html Cleaned the cartridges, did an alignment, but it refuses to print,does not copy or print, seems like the cartridges are to high over the paper, at first it just got lighter, Now, does anyone have a fix for the paper feed problem where the paper grabs from one side about 70% of the time? If the printer fails to print, remove both cartridges and try the test again. (It will feed the paper through and print a blank page.) 5.

To your right, it's small and faint, but it should read "A-03" going in an upward direction. check my blog Clem (from fixyourownprinter.com) This works! Funny how everyone on here was about to throw it out - I told my wife the same thing - "If these new cartridges don't work, I'm throwing the damn thing Sign in to report inappropriate content.

Please try again later. I have tried wiping the bard and the encoder srtip is in its right place but still no joy. Charly Martinez 100,925 views 6:47 DTG Kiosk cleaning the encoder strip - Duration: 3:49. this content This has happened twice.

Nothing works. Question about Lexmark X Printers & Copiers 1 Answer Printer displays hardware error 0502 wont print " HELP " ...hardware error 0502 wont print " HELP " Printer displays hardware error Min Reply marty says: 2007-03-29 at 2:32 am I have a Lexmark 5150 and accross all of my color copies I am getting a series of dicrete blue lines spaced about

I used spray cleaner with paper towel on the rod and still couldn't get it to work.

I wiped and got the black residue; printer now works just fine. Suggestions: wash hands thoroughly before doing this. by unknown on Jan 31, 2010 at 8:49am Add comment Please sign in to comment 0 I have had a Lexmark X5150. I poured in 91\% rubbing alcohol and let it drip into a sink in that direction careful not to get any alcohol on electrical components or the encoder strip.

This is exactly the answer I was looking for since giving my old X6150 to my father for his office. It comes off like this: Don't break anything. Reply J.Bell says: 2009-12-29 at 2:02 am It works U da man Reply LW says: 2009-12-29 at 7:47 pm Works Great, but we have another printer not a lexmark just in http://jennysbookreview.com/hardware-error/hardware-error-0502-lexmark-printer.php Reply joe says: 2008-01-03 at 3:46 pm it really did work by just wiping down used a little alcohol just to make kleenex a little moist tks…..

Reply Auto says: 2008-12-13 at 2:37 am Thanks for the tip Had the 0502 error on a Lexmark all in one at the office that we use mainly for scanning I Reply Keith says: 2007-02-17 at 6:17 pm For the past couple of weeks .. I love you! Thanks for posting.

If you clean it, your problem should go away... Podem ajudar-me? I have tried so many things and ended up insanely frustrated every time! This mirror really helped to SEE what was going on back there.Anyway I have cleaned the rails, encoder strip , found the pen and still Hardware 0502.

I accidentally knocked this out and had to find a hole where it goes back in. by nod on Feb 13, 2008 at 2:33pm Add comment Please sign in to comment Just a thanks for posting the procedure for cleaning the encoder strip and the bar. Now about the paper feed problem?? Help.

and Thanks for the cleaning tip, regardless. WHAT ELSE CAN I DO TO GET IT TO WORK. Reply John says: 2009-12-08 at 4:06 am Yep, worked great.