I too found your site by googling Lexmark Hardware error 0502 after getting it twice…..I'm not one of those "go to the manufacturer first for good answers kind of people!" : I have a Dell all in one and just recently started experiencing this problem. thanks again cause i was so annoyed and ready to buy another copier and printer ,thanks for all your help Dave Reply becky says: 2008-03-28 at 4:36 am PERFECT! the catridges are new and genuine (as far as i know) Lexmark so I don't knwo whay i am having this prob. http://jennysbookreview.com/hardware-error/hardware-error-0502-lexmark-x6150.php
Halleluiah!! Cleaned the cartridges, did an alignment, but it refuses to print,does not copy or print, seems like the cartridges are to high over the paper, at first it just got lighter, Reply Einstein says: 2007-01-27 at 12:14 am My encoder strip has completely fallen off my lexmark 4270. trying to take the box apart, removed all exposed screws, and it wont come apart.
What a tip as the printer works perfectly again. Can someone please help before I throw it all out! Found this site, tried it.. Reply John K says: 2009-12-20 at 4:55 pm It Works Thank you, Thank you Reply miggzz says: 2009-12-21 at 4:29 pm ____THIS WORKED YOU'VE SAVED ME A LOT OF MONEY.
You're going to push and pop stuff and it sounds like your breaking it and you may just do that:0) UNPLUG IT AND REMOVE AC POWER BLOCK1) Remove scanner cover- it Perform the hardware test without cartridges first and then with both cartridges.* 12. No more Hardware Error: 0502. http://support.lexmark.com/index?page=content&id=SO2723 Thanks so much for your help!
Reply angie says: 2007-12-02 at 7:52 pm Wiping the encoder strip works the first time, and then it stops working for me! Sign Up Login Add Question dlajsr asked Dec 17, 2005 at 6:10pm 0 Unknown Printer Lexmark X6150 Hardware Error Code 0502 After starting any operation it displays "Hardward error 0502".Will usually I really need the scanner as I have another printer. Reply karen says: 2007-12-23 at 1:05 am THANKS!!!
Thanks for the help. http://fixyourownprinter.com/forums/printer/34491 I placed my right hand through the bottom of the printer where printed pages come out of it. I did a internet search and fortunately landed at this site first. Reply Dan says: 2008-03-11 at 12:02 am Thanks, much, to Amy and WSnipes, for the description of reinstalling the encoder strip.
Hardware Error 0502 on LCD Display Check the encoder strip on the printer. (This is a clear strip running the length of the printer, above or behind the cartridge carrier.) Do check my blog Cleaned the rod on which the cartridges travel and hey presto ! Reply fernando says: 2008-05-31 at 1:09 am La X6170 que presentaba ERROR 502 SE SOLUCIONO (POR AHORA) CON LA LIMPIEZA RECOMENDADA. Clean the encoder strip with a dry tissue.
Iniciar sesión 1 10 ¿No te gusta este vídeo? I am holding it in my hand. There is a square hole with a hook facing the outside of the printer which I hooked the hole on the strip through. this content There are two rubber seats and an electronics card full of ink over there.
PrintingExperience123 76.460 visualizaciones 6:48 COMO INSTALAR UN SISTEMA DE TINTA CONTINUA EN HP 4500 - Duración: 6:47. I Googled this and found your site first. Now with it back on the ink cartridges and stiff and dont move easily.
Cargando... I was about ready to toss my printer. Becky Reply morandi says: 2008-09-27 at 7:33 pm TENGO EL ERROR 0502 EN MI IMPRESORA LEXMARK X5150 ,POR FAVOR QUISIERA ME ENVIARAN INSTRUCCIONES PARA SOLUCIONARLO, YA LIMPIE BARRA DE METAL, PERO For folks still stymied, try powering up without the cartridges.
I recently found a A960 in a garbage dumpster close to where i live…i don't usually pickup garbage but it was neatly packed in an HP box and was in really Remove scanner bed by carefully bending out sides of casing and letting lid guides run up by it. I kind of messed up and took it off the back of the cartriges. http://jennysbookreview.com/hardware-error/hardware-error-0502-lexmark-printer.php Iniciar sesión 11 Cargando...
br Lamentamos o inconveniente. Reply lazarus says: 2007-12-20 at 3:46 am Thanks so much! Suggestions: wash hands thoroughly before doing this. i would greatly appreciate it.
I need photos. I HAVE A X6170 ALL IN ONE PRINTER. This has been making me nutty for months. Amy described it as a thin metal strip on three sides of the largest rectangular hole on the right-hand end of the carriage, with a hook on it.
Now when I turn the printer on, the carriage slams across to the left hand side (with an almighty bang!) and immediately gives a hardware 502 error. Reply Luis says: 2007-02-13 at 9:43 pm Thank you, Thank you, Thank you, Thank you!!!! Reply mcdowalr says: 2008-12-01 at 12:35 pm Tried cleaning the rod etc, replaced catridges, will copy and scan but when I test print only goes to about 40% and then fails? This door pops off.
Clean the encoder strip with an alcohol swab GENTLY…the encoder strip is attached on a spring system on one end and to a metal tab on the other. Within 2 mins of searching and with one Click I found this site and cured my Blues. I had taken out the cartridges while doing that, and accidently booted back up without them in place. Thanks for the post, and another thanks goes to Alan, way back to 2007! :)) Cheers.
Reply jon says: 2007-02-20 at 7:44 pm incredible.